YAMAHA OUTBOARD MOTORS
Yamaha 25 Hp Four Stroke – F25LC – Forward Control
-
- ✔Long shaft
- ✔Manual start
- ✔Manual lift
- ✔59 Kg weight
- ✔Electronic fuel injection
- ✔Be sure to click ‘VIEW PRODUCT’ below and check out our inclusions as not all dealers package with the same tanks etc. Remember – compare apples with apples!
-
- ✔Genuine Yamaha 24 litre fuel tank
- ✔Genuine Yamaha fuel line
- ✔Genuine Yamaha alloy propeller
- ✔Genuine Yamalube oils
- ✔Outboard thumb screwed to transom
- ✔Recommend bolting on (optional)
- ✔Pre-delivery service
- ✔Genuine Yamaha owner’s manual
- ✔Personal handover and run through
-
- ✔Bolt on installation
- ✔Transom repairs or modifications
- ✔Transom board or grommets
- ✔Battery or battery switch
- ✔Battery cables if custom length
- ✔Fuel filter or lines if custom length
432cc Two-Cylinder – The four-valve, two-cylinder, Single Overhead Camshaft delivers sufficient torque from low to mid speed ranges for a quick response and smooth running.

Battery-Less Fuel Injection – The F25 is the first battery-less fuel injection system in Yamaha’s four-stroke range, making engine set-up more simple and convenient for pull-start models. The system takes into account engine requirements to achieve maximum engine performance including ‘first-time, every-time’ hot and cold starting.

Fresh Water Flushing System – Simply connect a hose to the easy access connector to flush salt and dirt from the outboard without having to run the engine. Flushing the engine after each usage reduces corrosion and extends the engines life.

Power Trim and Tilt – Yamaha’s push-button trim control makes engine trim and tilt adjustments quick, smooth and easy, across a wide range. The negative trim settings allow for improved acceleration and the ability to bring the boat onto its plane more quickly. Optional on certain models.

High-Output Alternator – A 16 Amp high-output alternator ensures that power is always available to start the engine, even after long periods of idling or running at low revs. This not only provides extra starting power, but delivers sufficient power to run the wide array of on-board electronic devices used in modern boating. (Battery charging kit optional).

Wide Span Mounting System – The large rubber mounts and the wide length between the mounts help to reduce engine vibration.

Mechanical Steering Control – The F20 has the choice between tiller or forwards mechanical control options.

Anti-Corrosion Paint System – Yamaha engines are known for their durability and high re-sale value. Part of this lies in the anti-corrosion protection. A unique YDC-30 aluminium alloy and 5-stage exterior paint coating process protects the engine’s exterior parts, while high-quality, marine-grade stainless steel componentry is used through-out.

Command Link – 6Y8 Round Gauges – Using Local Area Network (LAN) technology, these digital round gauges provide accurate and real-time tachometer, speed and fuel management stats, including fuel flow/consumption/economy (up to two tanks), trim level, battery voltage, push button trolling speed adjustments and more.

703 Side-Mounted Control – One of Yamaha’s best selling controls, this mechanical remote offers comfort, simplicity and flexibility. With its new ergonomic grip, reversible right-hand or left-hand installation, and convenient trim and tilt operation, this control offers all-round functionality and value.

6×3 Concealed Side-Mounted Control – With its stylish chrome finish and ergonomic design, this mechanical control not only looks good, but provides effortless one-hand operation. The trim and tilt switch is comfortably located on the handle and features easily accessible neutral warm-up controls and externally adjustable throttle friction.

704 Premium Single Binnacle Control – This highly-polished, stylish looking, top mounted control allows for effortless one-handed control. The ergonomic design features a thumb operated trim and tilt switch built into the handle, as well as shift and throttle control functions, for convenient and comfortable operation.

Alloy White F Series – These props deliver Yamaha’s high-quality design and performance in a low-cost, lightweight propeller. They offer a good all-round choice for Yamaha outboards, coming in a wide range of sizes and pitches to suit every power requirement.

Remote Control Security System – Yamaha’s optional Customer Outboard Protection (Y-COP) engine immobiliser system is easy to use and highly effective in stopping unauthorised start-ups when your boat is unattended. Simply push the button on the neat and simple remote to lock and unlock the engine.

Genuine Yamaha Propellers – Prop choice makes a huge difference to outboard acceleration, top-end speed, handling and fuel efficiency. That is why Yamaha continues to push the technological boundaries in the design and development of our leading range of high performance props – ensuring every Yamaha outboard performs at its peak.

F25 Performance Data Reports – We take out the guess work in buying a new outboard, by rigorously testing our engines on Australia’s most popular boat brands. See how the F25 performs for acceleration, fuel economy and top-end speed on your favourite boat.

Yamaha Outboard Tech – Yamaha offers a range of rigging options to suit every boat. Check out the full suite of controls, gauges, switches, props and other technologies, plus outboard performance data..

New Purpose-Built Multi-Function Tiller Handle – All F25 tiller models with power, trim and tilt (PTT) functionality, now feature a new tiller handle that is shorter and smaller, making it easier to use in tighter spaces. The PTT switch has been repositioned on the tiller handle, making it easier to reach – whether the boat is on the water, on a trailer, or the outboard and/or tiller handle are fully tilted up or down.

New Built-In Power Trim & Tilt (PTT) – Our latest F25 models now offer power, trim and tilt (PTT) functionality across both short shaft and long shaft models. PTT is available in both tiller and forward control options, giving small boat owners more choice and the option to select a premium featured engine for their hull.

Variable Trolling RPM Switch (VTS) – Standard on all F25 models, the Variable Trolling RPM Switch, located on the tiller handle or forward control gauge, allows you to set the perfect speed for trolling your favourite lure. Speed can be fine tuned, up or down, in 50 RPM increments, from 750 to 1050 RPM.

Digital Gauges Compatible – The F25 is fully compatible with Yamaha’s Digital Network Gauges (Command Link), giving you the information needed to maximise engine performance and efficiency. This engine is also NMEA2000 compatible allowing the F25 to share information with third party multi-function displays, GPS and fish finders.

CL5 Premium Touchscreen Display – The all-new, low profile Yamaha Command Link CL5 touchscreen display is small in size but big on information, features and capability. This display is suitable for all Yamaha Electronic Fuel Injected (EFI) engines and can monitor up to four outboards. It’s sophisticated, modern design features intuitive operation and matches the latest boat console trends, while its compact size leave more room on the console for other electronics.

Conventional – 6Y5 Round Gauges – Yamaha’s most affordable Tachometer and Speedometer gauges offer RPM, Trim Angle, Oil Pressure, Overheat Warning, Trip Hours, Total Operating Hours, Speed, Trip Distance, Time, Fuel Level, Low-Fuel Warning and Battery Voltage/Warning.

View more
Code
F25SMHC
Height
S: 424 [16.7] | L: 551 [21.7]
Weight
S (MH): 57 | L(MH): 59 | S(WT): 64 | L (WT): 65 | S(WTH): 66 | L (WTH): 67
Engine
4-Stroke, SOHC In-line 2
Displacement
432
Bore
65 x 65.1
5000-6000
Marine Outboard
Wet-sump
Fuel
EFI
Ignition
CDI
Starter
Manual Starter (M), Manual and Electric Starter (W)
Alternator
12V – 16A with Rectifier Regulator (Battery Charging Kit Optional)
Operation
Tiller Handle (H), Remote Control
Tilt
Manual Tilt, Power Trim and Tilt (T)
Guages
Optional
Optional
2.08 : 1
3
1
View more
-
- ✔Genuine Yamaha 24 litre fuel tank
- ✔Genuine Yamaha fuel line
- ✔Genuine Yamaha alloy propeller
- ✔Genuine Yamalube oils
- ✔Outboard thumb screwed to transom
- ✔Recommend bolting on (optional)
- ✔Pre-delivery service
- ✔Genuine Yamaha owner’s manual
- ✔Personal handover and run through
-
- ✔Bolt on installation
- ✔Transom repairs or modifications
- ✔Transom board or grommets
- ✔Battery or battery switch
- ✔Battery cables if custom length
- ✔Fuel filter or lines if custom length
432cc Two-Cylinder – The four-valve, two-cylinder, Single Overhead Camshaft delivers sufficient torque from low to mid speed ranges for a quick response and smooth running.

Battery-Less Fuel Injection – The F25 is the first battery-less fuel injection system in Yamaha’s four-stroke range, making engine set-up more simple and convenient for pull-start models. The system takes into account engine requirements to achieve maximum engine performance including ‘first-time, every-time’ hot and cold starting.

Fresh Water Flushing System – Simply connect a hose to the easy access connector to flush salt and dirt from the outboard without having to run the engine. Flushing the engine after each usage reduces corrosion and extends the engines life.

Power Trim and Tilt – Yamaha’s push-button trim control makes engine trim and tilt adjustments quick, smooth and easy, across a wide range. The negative trim settings allow for improved acceleration and the ability to bring the boat onto its plane more quickly. Optional on certain models.

High-Output Alternator – A 16 Amp high-output alternator ensures that power is always available to start the engine, even after long periods of idling or running at low revs. This not only provides extra starting power, but delivers sufficient power to run the wide array of on-board electronic devices used in modern boating. (Battery charging kit optional).

Wide Span Mounting System – The large rubber mounts and the wide length between the mounts help to reduce engine vibration.

Mechanical Steering Control – The F20 has the choice between tiller or forwards mechanical control options.

Anti-Corrosion Paint System – Yamaha engines are known for their durability and high re-sale value. Part of this lies in the anti-corrosion protection. A unique YDC-30 aluminium alloy and 5-stage exterior paint coating process protects the engine’s exterior parts, while high-quality, marine-grade stainless steel componentry is used through-out.

Command Link – 6Y8 Round Gauges – Using Local Area Network (LAN) technology, these digital round gauges provide accurate and real-time tachometer, speed and fuel management stats, including fuel flow/consumption/economy (up to two tanks), trim level, battery voltage, push button trolling speed adjustments and more.

703 Side-Mounted Control – One of Yamaha’s best selling controls, this mechanical remote offers comfort, simplicity and flexibility. With its new ergonomic grip, reversible right-hand or left-hand installation, and convenient trim and tilt operation, this control offers all-round functionality and value.

6×3 Concealed Side-Mounted Control – With its stylish chrome finish and ergonomic design, this mechanical control not only looks good, but provides effortless one-hand operation. The trim and tilt switch is comfortably located on the handle and features easily accessible neutral warm-up controls and externally adjustable throttle friction.

704 Premium Single Binnacle Control – This highly-polished, stylish looking, top mounted control allows for effortless one-handed control. The ergonomic design features a thumb operated trim and tilt switch built into the handle, as well as shift and throttle control functions, for convenient and comfortable operation.

Alloy White F Series – These props deliver Yamaha’s high-quality design and performance in a low-cost, lightweight propeller. They offer a good all-round choice for Yamaha outboards, coming in a wide range of sizes and pitches to suit every power requirement.

Remote Control Security System – Yamaha’s optional Customer Outboard Protection (Y-COP) engine immobiliser system is easy to use and highly effective in stopping unauthorised start-ups when your boat is unattended. Simply push the button on the neat and simple remote to lock and unlock the engine.

Genuine Yamaha Propellers – Prop choice makes a huge difference to outboard acceleration, top-end speed, handling and fuel efficiency. That is why Yamaha continues to push the technological boundaries in the design and development of our leading range of high performance props – ensuring every Yamaha outboard performs at its peak.

F25 Performance Data Reports – We take out the guess work in buying a new outboard, by rigorously testing our engines on Australia’s most popular boat brands. See how the F25 performs for acceleration, fuel economy and top-end speed on your favourite boat.

Yamaha Outboard Tech – Yamaha offers a range of rigging options to suit every boat. Check out the full suite of controls, gauges, switches, props and other technologies, plus outboard performance data..

New Purpose-Built Multi-Function Tiller Handle – All F25 tiller models with power, trim and tilt (PTT) functionality, now feature a new tiller handle that is shorter and smaller, making it easier to use in tighter spaces. The PTT switch has been repositioned on the tiller handle, making it easier to reach – whether the boat is on the water, on a trailer, or the outboard and/or tiller handle are fully tilted up or down.

New Built-In Power Trim & Tilt (PTT) – Our latest F25 models now offer power, trim and tilt (PTT) functionality across both short shaft and long shaft models. PTT is available in both tiller and forward control options, giving small boat owners more choice and the option to select a premium featured engine for their hull.

Variable Trolling RPM Switch (VTS) – Standard on all F25 models, the Variable Trolling RPM Switch, located on the tiller handle or forward control gauge, allows you to set the perfect speed for trolling your favourite lure. Speed can be fine tuned, up or down, in 50 RPM increments, from 750 to 1050 RPM.

Digital Gauges Compatible – The F25 is fully compatible with Yamaha’s Digital Network Gauges (Command Link), giving you the information needed to maximise engine performance and efficiency. This engine is also NMEA2000 compatible allowing the F25 to share information with third party multi-function displays, GPS and fish finders.

CL5 Premium Touchscreen Display – The all-new, low profile Yamaha Command Link CL5 touchscreen display is small in size but big on information, features and capability. This display is suitable for all Yamaha Electronic Fuel Injected (EFI) engines and can monitor up to four outboards. It’s sophisticated, modern design features intuitive operation and matches the latest boat console trends, while its compact size leave more room on the console for other electronics.

Conventional – 6Y5 Round Gauges – Yamaha’s most affordable Tachometer and Speedometer gauges offer RPM, Trim Angle, Oil Pressure, Overheat Warning, Trip Hours, Total Operating Hours, Speed, Trip Distance, Time, Fuel Level, Low-Fuel Warning and Battery Voltage/Warning.

View more
Code
F25SMHC
Height
S: 424 [16.7] | L: 551 [21.7]
Weight
S (MH): 57 | L(MH): 59 | S(WT): 64 | L (WT): 65 | S(WTH): 66 | L (WTH): 67
Engine
4-Stroke, SOHC In-line 2
Displacement
432
Bore
65 x 65.1
Max RPM
5000-6000
Spec Config
Marine Outboard
Lubrication
Wet-sump
Fuel
EFI
Ignition
CDI
Starter
Manual Starter (M), Manual and Electric Starter (W)
Alternator
12V – 16A with Rectifier Regulator (Battery Charging Kit Optional)
Operation
Tiller Handle (H), Remote Control
Tilt
Manual Tilt, Power Trim and Tilt (T)
Guages
Optional
Network Guages
Optional
Gear Ratio
2.08 : 1
Oeda Rating
3
Lpd Switch
1